O'Reilly logo

RF Analog Impairments Modeling for Communication Systems Simulation: Application to OFDM-based Transceivers by Lydi Smaini

Stay ahead with the world's most comprehensive technology and business learning platform.

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, tutorials, and more.

Start Free Trial

No credit card required

2.6 Sampling Frequency Offset

2.6.1 Description

Like the carrier frequencies, transmitter and receiver sampling frequencies used by the DAC and ADC are generally slightly mismatched. This impairment is known as SFO and will degrade the system performance.

Due to the SFO the received signal x(t) is sampled at n(Ts + ΔT) instead of the ideal nTs:

2.99 2.99

The SFO is defined as

2.100 2.100

in which Fs is the ideal sampling frequency, Fs = 1/Ts, and ΔT/Ts is the relative sampling clock offset. Because ΔT/Ts is generally specified in ppm and then much smaller than one, we can approximate Equation 2.100 as

2.101 2.101

in which δ is the normalized relative sampling clock accuracy/precision generally specified in ppm. For example, 50 ppm precision for a sampling clock running at 100 MHz means a possible SFO of 5 kHz.

2.6.2 Impact of SFO in OFDM

Let us suppose that the receiver is impaired by an SFO but perfectly synchronized on the symbols; in this case the OFDM baseband signal is expressed as

2.102 2.102

in which N is the total number of subcarriers within the OFDM symbol (including DC and guard bands), sk is ...

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, interactive tutorials, and more.

Start Free Trial

No credit card required