Design for Six Sigma for Green Belts and Champions: Applications for Service Operations—Foundations, Tools, DMADV, Cases, and Certification

Chapter 7. Design Phase

<feature><title>Sections</title>

	Introduction
7.1	Steps of the Design Phase
7.2	Inputs of the Design Phase
7.3	Constructing a Detailed Design
7.4	Develop Detailed CTPs for CTQs and High-Level CTPs
7.5	Create a Comprehensive Set of Detailed CTPs
7.6	Operationally Define Each Detailed CTP
7.7	Validate the Measurement System for Each Detailed CTP
7.8	Establish Baseline Capabilities for Each CTQ and CTP
7.9	Conduct a Capacity Analysis
7.10	Perform a FMEA of the Detailed CTPs
7.11	Constructing Detailed Design Scorecards
7.12	Performing Accounting Analysis
7.13	Prepare a Control and Verification Plan
7.14	Conduct Design Phase Tollgate Review (Check Sheet)
7.15	Outputs of the Design Phase
	Summary
	References

</feature><feature><title>Learning Objectives</title> ...