You are previewing Arduino Internals.

Arduino Internals

Cover of Arduino Internals by Dale Wheat Published by Apress
  1. Title
  2. Dedication
  3. Contents at a Glance
  4. Contents
  5. About the Author
  6. About the Technical Reviewers
  7. Acknowledgments
  8. Preface
    1. Intended Audience
    2. What This Book Isn't
    3. Chapter Overview
    4. Summary
  9. Chapter 1: Hardware
    1. What Is an Arduino?
    2. The Arduino Uno
    3. The Arduino Mega 2560
    4. Previous Hardware
    5. Who Makes Arduinos?
    6. Build Your Own
    7. Summary
  10. Chapter 2: Software
    1. Hosts and Targets
    2. Step by Step
    3. Semiautomatic
    4. Going Further
    5. Summary
  11. Chapter 3: Atmel AVR
    1. Origins
    2. AVR Device Families
    3. When in Doubt: Product Datasheets
    4. Device Packaging
    5. Pin Descriptions
    6. AVR Core
    7. Internal Peripherals
    8. Summary
  12. Chapter 4: Supporting Hardware
    1. Schematic Diagrams
    2. Getting Power to the Board
    3. Serial Interface
    4. The Processor
    5. Room for Expansion
    6. The Mechanical Form Factor
    7. Universal Serial Bus (USB): Signals Plus Power
    8. Summary
  13. Chapter 5: Arduino Software
    1. Open Source Software
    2. Multiplatform Support
    3. The Arduino Heritage
    4. Installing the Software
    5. The Process, or “How to Arduino”
    6. A Tour of the User Interface
    7. Summary
  14. Chapter 6: Optimizations
    1. How Will You Know It Worked?
    2. Shrink Blink
    3. Saving Space with Simple Serial Communication
    4. Saving SRAM
    5. Low Power or High Speed?
    6. Electronic Measurements
    7. Summary
  15. Chapter 7: Hardware Plus Software
    1. Available Peripherals
    2. Summary
  16. Chapter 8: Example Projects
    1. Beyond the Blinking LED: Starting Simply
    2. Other Uses for a Blinking LED
    3. A Lot of Blinking LEDs
    4. A Digital Clock
    5. Summary
  17. Chapter 9: Project Management
    1. Documentation
    2. Teamwork and Collaborative Development
    3. Licensing Your Work
    4. Summary
  18. Chapter 10: Hardware Design
    1. Learning About Hardware
    2. Infrared Proximity Sensor
    3. Your Own Custom Arduino
    4. Design Software
    5. Summary
  19. Chapter 11: Software Design
    1. Advanced Topics Within Arduino
    2. And Without Arduino
    3. Summary
  20. Chapter 12: Networking
    1. Point-to-Point Networking
    2. MIDI: Musical Instrument Digital Interface
    3. The Internet
    4. Summary
  21. Chapter 13: More Example Projects
    1. An Autonomous Robot
    2. Power Supply
    3. Motion Control
    4. Sensors
    5. Control Systems
    6. Example Robot Projects
    7. Summary
  22. Index
O'Reilly logo

A Digital Clock

First, a disclaimer: This is not a very good digital clock. It's the beginning of a really nice digital clock project, but only that: a beginning. Let's look at what it does and how it does it. Then you can think about possible (mandatory?) upgrades and some of the ways you might want to implement them.

Building a good digital clock is a bit outside the scope of this chapter. But after working on this project, you should have a good idea of what would be involved in taking this project to the next level, should you desire to do so. If not, please feel free to skip to the next chapter.

Figure 8-25 is the schematic of the clock. It's drawn as an Arduino shield, but unless your digital clock needs an USB interface, it may be easier ...

The best content for your career. Discover unlimited learning on demand for around $1/day.