To configure software-based layer 2 bridging, the following prerequisites need to be met:
- NSX Manager must be installed.
- NSX Controllers must be installed.
- VXLAN must be configured.
- The logical switch must be created, in this example DB-Tier.
- NSX DLR must be deployed. For step-by-step instructions on how to deploy an NSX DLR, see Chapter 3, Configuring VMware NSX Logical Routing.
- NSX DLR control VM must be deployed.
- dvPortGroup for VLAN bridging must be provisioned on vSphere cluster where NSX DLR control VM resides. In this example, the dvPortGroup is Bridged-Net_RegionA01 with VLAN ID 103 created on a vDS. ...