RSVP Commands
Two types of RSVP commands are applicable to MPLS TE: global configuration commands and interface configuration commands.
The global configuration commands are as follows.
| Command | Modifiers | Default | Use |
|---|---|---|---|
| ip rsvp msg-pacing | [period msec [burst msgs [max_size qsize]]] | Off | If you have large numbers of RSVP messages to send, message pacing throttles message transmission so that the router on the other end of the link is not overwhelmed with signalling messages. |
| ip rsvp signalling hello | {statistics} | Off | Enables RSVP hellos. |
The interface configuration command (which is also covered in the section “Physical Interface Configuration Commands”) is as follows.
| Command | Modifiers | Default | Use |
|---|---|---|---|
| ip rsvp bandwidth | [1-10000000 reservable BW [sub-pool ... |
Get Traffic Engineering with MPLS now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
