Global Configuration Commands
To enable MPLS TE SNMP traps, use the following global command.
| Command | Modifiers | Default | Use |
|---|---|---|---|
| snmp-server enable traps mpls traffic-eng | {down | reroute | up} | Disabled | Enables MPLS TE traps for tunnel down, tunnel reroute, or tunnel up events. If you enable snmp-server enable traps mpls traffic-eng, all three traps are enabled. |
All other commands in global configuration mode start with mpls traffic-eng.
| Command | Modifiers | Default | Use |
|---|---|---|---|
| …auto-bw timers | [frequency 1-604800 seconds] | 300 seconds | Determines how often tunnel bandwidth is polled for all interfaces with auto bandwidth enabled. |
| …link-management timers bandwidth-hold | 1-300 seconds | 15 seconds | Determines how long bandwidth requested in a Path message is set aside ... |
Get Traffic Engineering with MPLS now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
