You are previewing The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists.

The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists

  1. Cover
  2. About the Author
  3. Title Page
  4. Copyright Page
  5. Contents
  6. Preface
  7. Acknowledgments
  8. Part 1 Metalworking 101
    1. 1 Safety First
      1. General Shop Safety
      2. Shop Hazards
      3. Personal Protective Equipment (PPE)
      4. Shop Safety Equipment
      5. Minimum Safety Equipment Review
    2. 2 Welding 101
      1. What Is Welding?
      2. What Isn’t Welding?
      3. How Welding Works
      4. Types of Welders
      5. Types of Welds and Joints
      6. A Brief History of Welding
    3. 3 Steel
      1. What Is Steel?
      2. Mild-Steel Properties
      3. How to Obtain Steel
    4. 4 Metalworking Studio
      1. Layout
      2. Buying Tools
      3. Cleaning and Maintenance
    5. 5 Basic Hand Tools
      1. Clamps
      2. Vice-Grips
      3. Measuring Tape
      4. Wire Cutters
      5. Magnetic Angles
      6. Other Layout Tools
      7. Slag Hammer
      8. Files
      9. Scribe
      10. Soapstone
    6. 6 Grinding and Cutting
      1. Angle Grinder
      2. Bench Grinder
      3. Chop Saw
      4. Parts
      5. Types of Disks
      6. Safety
      7. Practice
    7. 7 Drill Press
      1. Parts
      2. Accessories
      3. Drill Bits
      4. Speeds
      5. Drilling Practice
    8. 8 Roll Bending
      1. Parts
      2. Rolling Practice
    9. 9 Oxygen-Acetylene Torch
      1. Parts and Accessories
      2. Torch Cutting
      3. Torch Welding
      4. Torch Bending
    10. 10 Plasma Cutter
      1. Parts
      2. Operation
      3. Practice
    11. 11 Metal–Inert Gas (MIG) Welder
      1. Parts
      2. MIG Gun
      3. Inside a MIG Welder
      4. MIG Welder Consumables
      5. MIG Welder Adjustments
      6. You Are in Control
      7. Weld Vision
      8. Weld Orientation
      9. Operation
      10. Practice
    12. 12 Finishing
      1. Steel Preparation
      2. Muriatic Acid
      3. Paint
      4. Clear Finish
      5. Wax
      6. Powder Coating
  9. Part 2 Projects
    1. 13 Project Preparation
      1. Materials
      2. Studio Access
      3. Time
    2. 14 Start from Scratch
    3. 15 Cube
    4. 16 Plant Stand
    5. 17 Candelabras
    6. 18 End Table
    7. 19 Fireplace Log Holder
      1. Finishing
    8. 20 Garden Cart
      1. Finishing
    9. 21 Barbecue
      1. Finishing
  10. Resources
    1. Education and Studio Resources (Listed West to East)
    2. General Welding and Online Resources
  11. Index
O'Reilly logo

CHAPTER 20

 

Garden Cart

This project is going to require using some extra pieces and parts, and introduce some extremely useful fabrication basics. The basic platform of this cart could be modified to work with a number of different-sized bicycle wheels and even could be outfitted to work as a bicycle trailer. Figure 20.1 shows the framework with wheels before adding the plywood panels.

image

FIGURE 20.1 Garden cart.

What You Need

• 1- × 1- × image-in angle stock

• 1- × 1- × 0.083-in square tubing

• - × 1-in flat stock

• ¾-in pipe

• -in round stock

• Bicycle ...

The best content for your career. Discover unlimited learning on demand for around $1/day.