You are previewing The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists.

The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists

  1. Cover
  2. About the Author
  3. Title Page
  4. Copyright Page
  5. Contents
  6. Preface
  7. Acknowledgments
  8. Part 1 Metalworking 101
    1. 1 Safety First
      1. General Shop Safety
      2. Shop Hazards
      3. Personal Protective Equipment (PPE)
      4. Shop Safety Equipment
      5. Minimum Safety Equipment Review
    2. 2 Welding 101
      1. What Is Welding?
      2. What Isn’t Welding?
      3. How Welding Works
      4. Types of Welders
      5. Types of Welds and Joints
      6. A Brief History of Welding
    3. 3 Steel
      1. What Is Steel?
      2. Mild-Steel Properties
      3. How to Obtain Steel
    4. 4 Metalworking Studio
      1. Layout
      2. Buying Tools
      3. Cleaning and Maintenance
    5. 5 Basic Hand Tools
      1. Clamps
      2. Vice-Grips
      3. Measuring Tape
      4. Wire Cutters
      5. Magnetic Angles
      6. Other Layout Tools
      7. Slag Hammer
      8. Files
      9. Scribe
      10. Soapstone
    6. 6 Grinding and Cutting
      1. Angle Grinder
      2. Bench Grinder
      3. Chop Saw
      4. Parts
      5. Types of Disks
      6. Safety
      7. Practice
    7. 7 Drill Press
      1. Parts
      2. Accessories
      3. Drill Bits
      4. Speeds
      5. Drilling Practice
    8. 8 Roll Bending
      1. Parts
      2. Rolling Practice
    9. 9 Oxygen-Acetylene Torch
      1. Parts and Accessories
      2. Torch Cutting
      3. Torch Welding
      4. Torch Bending
    10. 10 Plasma Cutter
      1. Parts
      2. Operation
      3. Practice
    11. 11 Metal–Inert Gas (MIG) Welder
      1. Parts
      2. MIG Gun
      3. Inside a MIG Welder
      4. MIG Welder Consumables
      5. MIG Welder Adjustments
      6. You Are in Control
      7. Weld Vision
      8. Weld Orientation
      9. Operation
      10. Practice
    12. 12 Finishing
      1. Steel Preparation
      2. Muriatic Acid
      3. Paint
      4. Clear Finish
      5. Wax
      6. Powder Coating
  9. Part 2 Projects
    1. 13 Project Preparation
      1. Materials
      2. Studio Access
      3. Time
    2. 14 Start from Scratch
    3. 15 Cube
    4. 16 Plant Stand
    5. 17 Candelabras
    6. 18 End Table
    7. 19 Fireplace Log Holder
      1. Finishing
    8. 20 Garden Cart
      1. Finishing
    9. 21 Barbecue
      1. Finishing
  10. Resources
    1. Education and Studio Resources (Listed West to East)
    2. General Welding and Online Resources
  11. Index
O'Reilly logo

CHAPTER 19

 

Fireplace Log Holder

For this project, you’re going to build a heavy-duty fireplace log holder in a modern style (shown in Figure 19.1). This project again will introduce a type of jig and provide practice at making multiples of one piece.

image

FIGURE 19.1 Fireplace log holder.

What You Need

• 10-gauge sheet metal for the jig

• 1-in flat stock and image-in square stock or similar, also for the jig

• ½-in round stock

• Hand tools

• A grinder

• A torch with a rosebud tip

• A metal–inert gas (MIG) welder

Instructions

1. There are two options for ...

The best content for your career. Discover unlimited learning on demand for around $1/day.