You are previewing The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists.

The TAB Guide to DIY Welding : Hands-on Projects for Hobbyists, Handymen, and Artists

  1. Cover
  2. About the Author
  3. Title Page
  4. Copyright Page
  5. Contents
  6. Preface
  7. Acknowledgments
  8. Part 1 Metalworking 101
    1. 1 Safety First
      1. General Shop Safety
      2. Shop Hazards
      3. Personal Protective Equipment (PPE)
      4. Shop Safety Equipment
      5. Minimum Safety Equipment Review
    2. 2 Welding 101
      1. What Is Welding?
      2. What Isn’t Welding?
      3. How Welding Works
      4. Types of Welders
      5. Types of Welds and Joints
      6. A Brief History of Welding
    3. 3 Steel
      1. What Is Steel?
      2. Mild-Steel Properties
      3. How to Obtain Steel
    4. 4 Metalworking Studio
      1. Layout
      2. Buying Tools
      3. Cleaning and Maintenance
    5. 5 Basic Hand Tools
      1. Clamps
      2. Vice-Grips
      3. Measuring Tape
      4. Wire Cutters
      5. Magnetic Angles
      6. Other Layout Tools
      7. Slag Hammer
      8. Files
      9. Scribe
      10. Soapstone
    6. 6 Grinding and Cutting
      1. Angle Grinder
      2. Bench Grinder
      3. Chop Saw
      4. Parts
      5. Types of Disks
      6. Safety
      7. Practice
    7. 7 Drill Press
      1. Parts
      2. Accessories
      3. Drill Bits
      4. Speeds
      5. Drilling Practice
    8. 8 Roll Bending
      1. Parts
      2. Rolling Practice
    9. 9 Oxygen-Acetylene Torch
      1. Parts and Accessories
      2. Torch Cutting
      3. Torch Welding
      4. Torch Bending
    10. 10 Plasma Cutter
      1. Parts
      2. Operation
      3. Practice
    11. 11 Metal–Inert Gas (MIG) Welder
      1. Parts
      2. MIG Gun
      3. Inside a MIG Welder
      4. MIG Welder Consumables
      5. MIG Welder Adjustments
      6. You Are in Control
      7. Weld Vision
      8. Weld Orientation
      9. Operation
      10. Practice
    12. 12 Finishing
      1. Steel Preparation
      2. Muriatic Acid
      3. Paint
      4. Clear Finish
      5. Wax
      6. Powder Coating
  9. Part 2 Projects
    1. 13 Project Preparation
      1. Materials
      2. Studio Access
      3. Time
    2. 14 Start from Scratch
    3. 15 Cube
    4. 16 Plant Stand
    5. 17 Candelabras
    6. 18 End Table
    7. 19 Fireplace Log Holder
      1. Finishing
    8. 20 Garden Cart
      1. Finishing
    9. 21 Barbecue
      1. Finishing
  10. Resources
    1. Education and Studio Resources (Listed West to East)
    2. General Welding and Online Resources
  11. Index
O'Reilly logo

CHAPTER 7

 

Drill Press

A drill press is a motorized drill attached to a stable worktable that allows you to carefully control the depth, speed, and angle of a round hole. This is a fairly common tool around all sorts of shops whether they are focused on wood or metal, and the machines are generally interchangeable. With a handheld drill, even the most experienced metalworker will have trouble making holes through steel that are uniform in depth and perfectly straight. The drill press allows you to dial in the exact angle you need and to repeat it easily (Figure 7.1).

image

FIGURE 7.1 Floor-mounted drill press in use.

There are many reasons why you ...

The best content for your career. Discover unlimited learning on demand for around $1/day.