Experiment 14

How to Parse Data from Digital and Analog Pins and Control Individual Digital Outputs

Requirements

2 XBee modules

1 XBee adapter board

1 220-ohm resistor, 1/4 watt, 10% resistor (red-red-brown)

1 4700-kohm, 1/4W, 10% resistor (yellow-violet-red)

1 10-kohm, 1/4W, 10% resistor (brown-black-orange)

1 10-kohm potentiometer

1 LED

1 Solderless breadboard

1 USB-to-XBee adapter

1 USB cable—type-A to mini-B

Digi X-CTU software running on a Windows PC, with an open USB port

Introduction

In this experiment you will learn how to use an application programming interface (API) command to ask a remote XBee module to reply with information about the state of its digital I/O pins and the values from all active analog-to-digital converter (ADC) ...

Get The Hands-on XBEE Lab Manual now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.