You are previewing Snip, Burn, Solder, Shred.

Snip, Burn, Solder, Shred

Cover of Snip, Burn, Solder, Shred by David Erik Nelson Published by No Starch Press
O'Reilly logo

Building the Box Kite

The finished Box Kite

Figure 23-13. The finished Box Kite

  1. Once again, begin by constructing the sails. Split three 10″×13″ envelopes down both 13″ sides, resulting in three strips, each 10″ wide by 26″ long, plus the self-adhesive flaps (leave the flaps intact; see Figure 23-14).

    The 10″×13″ envelope, cut and unfolded to a 10″ by 26″ piece of Tyvek

    Figure 23-14. The 10″×13″ envelope, cut and unfolded to a 10″ by 26″ piece of Tyvek

  2. Use the self-adhesive flaps to connect the three envelopes in a single 78″ long strip, as shown in Figure 23-15. Do the same with three more envelopes, and then set the two sails aside.

    Figure 23-15. A ...

The best content for your career. Discover unlimited learning on demand for around $1/day.