O'Reilly logo

Signal Processing and Integrated Circuits by Hussein Baher

Stay ahead with the world's most comprehensive technology and business learning platform.

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, tutorials, and more.

Start Free Trial

No credit card required

Chapter 11

Basic Integrated Circuits Building Blocks

11.1 Introduction

This chapter gives a concise presentation of the elementary circuits, employing the metal oxide semiconductor (MOS) structure, which form the basis for the design of the more composite building blocks of analog integrated circuits [22–24]. The use of MOS transistors as load devices is first introduced followed by the design principles of MOS amplifiers. Next, parasitic capacitances are discussed due to their importance to the operation of signal processing systems at high frequencies. In this context, the cascode amplifier is introduced with the objective of reducing the Miller effect. Finally, the current mirror is introduced followed by a discussion of the CMOS amplifier.

11.2 MOS Active Resistors and Load Devices

Active loads in MOS technology can be constructed from either enhancement-type or depletion-type devices. In the former case, the drain is connected to the gate, while in the latter the source is connected to the gate.

Figure 11.1 shows an NMOS diode-connected enhancement-type transistor together with its vi characteristic, which is defined by

11.1 11.1

and it always operates in saturation.

Figure 11.1 A diode-connected MOS transistor

11.1

For a transistor biased at a voltage V, we can write

11.2

and for ...

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, interactive tutorials, and more.

Start Free Trial

No credit card required