Programming over a virtual Ethernet modem on USB OTG
This is my favorite way to connect to the Raspberry Pi Zero. Not only can you operate it with a single USB cable, but you can get it attached to the network and be able to communicate with other machines and the Internet.
Getting ready
The same as the last recipe, if you have the USB OTG functions installed and a regular-to-micro USB cable, you are ready to go.
How to do it...
Just like the last recipe, be careful with the edits to cmdline.txt. You can make this change from the serial connection you made before, reboot, and go!
- The unedited version of the file should look something like this:
pi@rpz14101:~$ sudo cat /boot/cmdline.txt dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 ...
Get Raspberry Pi Zero Cookbook now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
