Electronic Synchronizer Systems — Camera to Projector Synchronizer Operating Instructions

  1. Set the camera shutter to its fully open position.
  2. Connect the synchronizer to the film camera with the 10-pin LEMO cable supplied with the kit. The 10-pin connector on the Camera is located under a small gray plastic hatch. On the synchronizer the connector is labelled CAMERA.
  3. Connect the sync cable from the projector shutter probe to the PROJECTOR IN socket on the rear of the synchronizer. (The PROJECTOR OUT connector is used when two or more cameras are synced to the same projector when a sync box is required for each camera).
  4. If required, connect the audio pulse cable to the AUDIO SYNC SIGNAL socket and to the recorder.
  5. The POWER light will come on ...

Get Panaflex User's Manual, 2nd Edition now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial