O'Reilly logo

Stay ahead with the world's most comprehensive technology and business learning platform.

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, tutorials, and more.

Start Free Trial

No credit card required

NX-OS Configuration Fundamentals LiveLessons (Video Training)

Video Description

Descripton

NX-OS Configuration Fundamentals LiveLessons is a unique video product that provides a solid understanding of NX-OS technologies across five product families. The product takes the student from an introduction to the product families and operating system, to Layer 2 and 3 capabilities before moving on to multicast and security. High availability, unique embedded serviceability features, and Unified Fabric and the Nexus 1000v are covered. Finally, QoS, OTV, MPLS, and LISP conclude the lessons. The most current updates in products and technologies have been incorporated, including OTV VLAN translation, L2 MPLS VPNs, LISP IGP assist, FabricPath multi-topology, and anycast HSRP, among many others.

NX-OS Configuration Fundamentals LiveLessons contains 13 individual video lessons, subdivided into 88 sublessons, for a total of 12 hours of instruction. The videos consist of audio instruction, animations, and video screencasts. Each video lab presents detailed objectives, lab diagrams, and video captures. Audio instruction throughout offers detailed explanations, tips, and configuration verifications. 

The 13 video lessons cover the following topics:

* Introduction to NX-OS
* Layer 2 Support and Configurations
* Layer 3 Support and Configurations
* IP Multicast Configuration
* Security
* High Availability
* Embedded Serviceability Features
* Unified Fabric
* Nexus 1000v
* Quality of Service (QoS)
* Overlay Transport Virtualization (OTV)
* MPLS
* LISP

About the Instructors

Ron Fuller, CCIE No. 5851 (Routing and Switching/Storage Networking), is a technical marketing engineer (TME) on the Nexus 7000 team for Cisco. He has 21 years of experience in the industry and has held certifications from Novell, HP, Microsoft, ISC2, SNIA, and Cisco. His focus is working with customers worldwide to address their challenges with comprehensive end-to-end data center architectures and how they can best use Cisco technology to their advantage. He has had the opportunity to speak at Cisco Live on VDCs, NX-OS Multicast, and general design. He lives in Ohio with his wife and four wonderful children and enjoys traveling and auto racing. He can be found on Twitter @ccie5851. 

David Jansen, CCIE No. 5952 (Routing/Switching) is a Distinguished Systems Engineer (DSE) for Cisco specializing in data center architectures. He has 20 years of experience in the industry and has held certifications from Novell, VMware, Microsoft, TOGAF, and Cisco. His focus is working with global enterprise customers to address their challenges with comprehensive end-to-end data center, Enterprise, and WAN/Internet architectures. David has been with Cisco for 16 years and working as a solutions architect for more than 7 years and has provided unique experiences in building these types of solutions. His education includes a Bachelor of Science of Engineering degree in computer science from the University of Michigan and a Master of Arts degree in adult education from Central Michigan University.

Matthew McPherson is a principal technical architect with AHEAD, a leading Midwest data-center virtualization and transformation partner. Prior to AHEAD, Matt was a solutions architect for Cisco in the Central Select Operation specializing in data center architectures. Matt has more than 13 years of experience in the industry, working for service providers and large Enterprise customers in the financial and manufacturing verticals. He has held certifications from Juniper, Netscreen, and Cisco and possesses a deep technical background in the areas of routing, switching, and security. His primary focus is working with AHEAD’s strategic customers in greater Michigan to accelerate their transformation from a builder of components to a broker of services.


Skill Level

Beginning to intermediate

What You Will Learn

Provides an easy-to-use and cost-effective means to learn the various concepts associated with NX-OS technologies.
Provides multimedia tutorials that users can apply to real-world scenarios

Who Should Take This Course

Primary Audience:The target audience for this book is the network engineer or operator.  

Secondary Audience: Help desk analysts or network administrators as well data center certification candidates. The students should be intermediate to expert level. 

Course Requirements

These LiveLessons assume common knowledge of Cisco IOS and network switching and routing theory. The typical student should have at least a CCNP certification and should be responsible for configuration and day-to-day operations of enterprise-level data center switches. The users could also be responsible for planning the interconnect strategy for data-center devices.
 
Table of Contents
 
Lesson 1: Introduction to NX-OS
Lesson 1.1: NX-OS Basics (10 minutes)
Lesson 1.2: NX-OS Command Line and Management (10 minutes)
Lesson 1.3: NX-OS File Systems (10 minutes)
Lesson 1.4: Nexus Product Updates
Lesson 1.5: Virtual Device Context (VDC) Fundamentals (10 minutes)
Lesson 1.6: VDC Advanced Topics (10 minutes)
Lesson 1.7: Troubleshooting Commands (10 minutes)

Lesson 2: Layer 2 Support and Configuration 
Lesson 2.1: Layer 2 Basics (7-8 Minutes)
Lesson 2.2: Advanced Spanning Tree (7-8 Minutes)
Lesson 2.3: Port Profiles (5 Minutes)
Lesson 2.4: Port Channels (5 Minutes)
Lesson 2.5: Virtual Port Channel (vPC) Terminology Primer and Basic Configuration (5 Minutes)
Lesson 2.6: Advanced vPC Features (7 Minutes)
Lesson 2.7: vPC Failure Scenarios (5 Minutes)
Lesson 2.8: Layer 2 Best Practices (5 Minutes)
Lesson 2.9: FabricPath Introduction (7 Minutes)
Lesson 2.10: Advanced FabricPath (7 Minutes)
Lesson 2.11: FabricPath Troubleshooting (5 Minutes)

Lesson 3: Layer 3 Support and Configuration
Lesson 3.1: EIGRP Basics (7-8 Minutes)
Lesson 3.2: Advanced EIGRP (7-8 Minutes)
Lesson 3.3: OSPF Basics (7-8 Minutes)
Lesson 3.4: Advanced OSPF (7-8 Minutes)
Lesson 3.5: BGP Basics (7-8 Minutes)
Lesson 3.6: BGP Verification (7-8 Minutes)
Lesson 3.7: IS-IS (5 Minutes)
Lesson 3.8: First Hop Redundancy Protocl (FHRP) (10 Minutes)
Lesson 3.9: FHRP Interaction with vPC and FabricPath (7-8 Minutes)

Lesson 4: Multicast 
Lesson 4.1: Multicast Basics (10 minutes)
Lesson 4.2: Protocol Independent Multicast (PIM) and Internet Group Management Protocol (IGMP) (10 minutes)
Lesson 4.3: Basic Multicast Configuration (10 minutes)
Lesson 4.4: Rendezvous Point (RP) Redundancy (10 minutes)
Lesson 4.5: Advanced Multicast Configuration (5 minutes)
Lesson 4.6: Control Plane Policing (CoPP) and Multicast (15 minutes)

Lesson 5: NX-OS Security 
Lesson 5.1: NX-OS Security Basics (10 minutes)
Lesson 5.2: NX-OS TrustSec Basics (10 minutes)
Lesson 5.3: NX-OS TrustSec Advanced Topics (10 minutes)
Lesson 5.4: Access List Basics (10 minutes)
Lesson 5.5: Traffic Storm Control (5 minutes)
Lesson 5.6: Control Plane Policing (13 minutes)

Lesson 6: High Availability 
Lesson 6.1: Nexus Hardware Basics (7-8 Minutes)
Lesson 6.2: Nexus Hardware Redundancy (7-8 Minutes)
Lesson 6.3: Generic Online Diagnostics (5 Minutes)
Lesson 6.4: NX-OS High Availability Architecture and Features (8 Minutes)
Lesson 6.5: NX-OS Software Upgrades – Cold Upgrade (5 Minutes)
Lesson 6.6: NX-OS Software Upgrades – ISSU Operation and Pre-Check (7-8 Minutes)
Lesson 6.7: NX-OS Software Upgrades – ISSU (7-8 Minutes)

Lesson 7: Embedded Services 
Lesson 7.1: Switched Port Analyzer (SPAN) in NX-OS (10 minutes)
Lesson 7.2: Encapsulated Remote SPAN (ERSPAN) in NX-OS (10 minutes)
Lesson 7.3: Embedded Analyzer (10 minutes)
Lesson 7.4: Smart Call Home (10 minutes)
Lesson 7.5: Configuration Checkpoint and Rollback (10 minutes)
Lesson 7.6: NetFlow (10 minutes)
Lesson 7.7: Network Time Protocol (NTP) (10 minutes)

Lesson 8: Unified Fabric
Lesson 8.1: Unified Fabric Basics (10 minutes)
Lesson 8.2: FCoE Basics (10 minutes)
Lesson 8.3: N Port Virtualization Options (10 minutes)
Lesson 8.4: Unified Fabric Configuration - Single Hop (10 minutes)
Lesson 8.5: Unified Fabric Configuration - Multihop (10 minutes)

Lesson 9: Nexus 1000v 
Lesson 9.1: Nexus 1000v Basics (10 minutes)
Lesson 9.2: Nexus 1000v Multi-Hypervisor Integration (10 minutes)
Lesson 9.3: Nexus 1000v InterCloud (12 minutes)

Lesson 10: Quality of Service (QoS)
Lesson 10.1: QoS Fundamentals (15 minutes)
Lesson 10.2: QoS in NX-OS (10 minutes)
Lesson 10.3: QoS on Nexus 7000 (15 minutes)
Lesson 10.4: QoS on Nexus 5000 (10 minutes)
Lesson 10.5: QoS on Nexus 1000v (10 minutes)

Lesson 11: Overlay Transport Virtualization (OTV) 
Lesson 11.1: OTV Basics (10 minutes)
Lesson 11.2: OTV Network Requirements and Options (10 minutes)
Lesson 11.3: OTV Multihoming and Failure Isolation (10 minutes)
Lesson 11.4: First Hop Redundancy Protocol (FHRP) Localization and OTV (10 minutes)
Lesson 11.5: OTV Traffic Depolarization (10 minutes)
Lesson 11.6: OTV VLAN Translation (10 minutes)
Lesson 11.7: OTV Integration with Fabrics

Lesson 12: MPLS 
Lesson 12.1: Virtual Routing and Forwarding (7-8 Minutes)
Lesson 12.2: Route Import/Export (7-8 Minutes)
Lesson 12.3: MPLS Basics (7-8 Minutes)
Lesson 12.4: Licensing and Hardware Requirements (5 Minutes)
Lesson 12.5: Advanced MPLS Topics (7-8 Minutes)
Lesson 12.6: MPLS Configuration (7-8 Minutes)
Lesson 12.7: MPLS and IPv6 (5 Minutes)
Lesson 12.8: MPLS Layer 2 VPN Basics (5 Minutes)
Lesson 12.9: MPLS Layer 2 VPN Configuration (5 Minutes)
Lesson 12.10: MPLS Management and Troubleshooting (7-8 Minutes)

Lesson 13: Locator ID Separator Protocol (LISP) 
Lesson 13.1: LISP Basics (10 minutes)
Lesson 13.2: LISP Control and Data Plane (10 minutes)
Lesson 13.3: LISP Communication with Non-LISP Networks (10 minutes)
Lesson 13.4: LISP and Host Mobility (10 minutes)
Lesson 13.5: LISP Multihop (10 minutes)
Lesson 13.6: LISP Best Practices (10 minutes)

Lesson 1 Introduction to NX-OS
This lesson covers the history of NX-OS, platform support, command-line interface, file systems, VDCs, VDCs with advanced topics, and troubleshooting commands.  

Lesson 2 Layer 2 Support and Configuration
This lesson covers Layer 2 functionality within NX-OS. This includes spanning tree, advanced spanning tree, port channels, virtual port channel, and FabricPath.

Lesson 3 Layer 3 Support and Configuration
In lesson 3, we explore Layer 3 topics including routing protocols such as EIGRP, OSPF, BGP, ISIS, and FHRPs.

Lesson 4 Multicast
Lesson 4 covers multicast-related topics including PIM, IGMP, RP redundancy, and advanced multicast configurations.

Lesson 5 NX-OS Security
This lesson provides an overview of NX-OS security basics, Cisco TrustSec, advanced topics with TrustSec, ACL basics, traffic storm control, and Control Plane Policing.

Lesson 6 High Availability
This lesson discusses NX-OS physical high availability, software high availability, ISSU, and GOLD. 

Lesson 7 Embedded Services
This lesson discusses embedded services features, such as SPAN, ERSPAN, the embedded analyzer, Smart Call Home, checkpoint and rollback, NetFlow, and NTP.

Lesson 8 Unified Fabric
Lesson 8 covers Cisco Unified Fabric, including FCoE basics and NPV as well as both single and multihop FCoE configurations.

Lesson 9 Nexus 1000v
This lesson covers the Nexus 1000v, including an overview, Multi-Hypervisor integration, and InterCloud.

Lesson 10 Quality of Service (QoS)
Lesson 10 discusses QoS fundamentals, Nexus 7000, Nexus 5000, and Nexus 1000v.

Lesson 11 Overlay Transport Virtualization (OTV)
This lesson reviews OTV starting with an overview, then network requirements and options, multihoming and failure isolation, FHRP localization, traffic depolarization, VLAN translation, and integration with next-generation fabrics.

Lesson 12 MPLS
Lesson 12 covers VRF functionality, licensing and hardware requirements, LDP and L3 and L2 VPNs as well as IPv6 and MPLS management and troubleshooting.

Lesson 13 Locator ID Separator Protocol (LISP)
Lesson 13 covers LISP starting with an overview, then the LISP control plane and data plane, communication with non-LISP networks, host mobility, multi-hop, and LISP best practices.

About LiveLessons Video Training

LiveLessons Video Training series publishes hundreds of hands-on, expert-led video tutorials covering a wide selection of technology topics designed to teach you the skills you need to succeed. This professional and personal technology video series features world-leading author instructors published by your trusted technology brands: Addison-Wesley, Cisco Press, IBM Press, Pearson IT Certification, Prentice Hall, Sams, and Que. Topics include IT Certification, Programming, Web Development, Mobile Development, Home and Office Technologies, Business and Management, and more. View all LiveLessons on InformIT at http://www.informit.com/livelessons.
 
The Cisco Press video library is an indispensable tool for keeping up with the latest Cisco technologies. We have published hundreds of up-to-date videos on a wide variety of key topics for professionals and IT certification candidates. The Video Mentor series is now part of the acclaimed LiveLessons series; otherwise, we haven't changed a thing. Whether you are a beginner, intermediate, or expert, you'll find the certification video training you need to accelerate your learning. So, what do you want to learn today? http://www.ciscopress.com/series/series.asp?ser=2185116.

Table of Contents

  1. Introduction
    1. NX-OS Configuration Fundamentals LiveLessons: Introduction 00:07:53
  2. Lesson 1: Introduction to NX-OS
    1. Learning Objectives 00:00:26
    2. 1.1 NX-OS Overview 00:06:52
    3. 1.2 NX-OS Command Line and Management 00:06:04
    4. 1.3 NX-OS File Systems 00:04:19
    5. 1.4 Nexus Product Updates 00:08:45
    6. 1.5 Virtual Device Context (VDC) Fundamentals 00:08:44
    7. 1.6 VDC Advanced Topics 00:10:11
    8. 1.7 Troubleshooting Commands 00:04:51
  3. Lesson 2: Layer 2 Support and Configuration
    1. Learning Objectives 00:00:38
    2. 2.1 Layer 2 Basics 00:16:06
    3. 2.2 Spanning Tree 00:12:23
    4. 2.3 Port Profiles 00:02:15
    5. 2.4 Port Channels 00:05:10
    6. 2.5 Virtual Port Channel (vPC) Basics 00:09:35
    7. 2.6 Configuring vPC 00:18:05
    8. 2.7 Advanced vPC 00:07:46
    9. 2.8 vPC Failure Scenarios 00:03:52
    10. 2.9 FabricPath Control Plane 00:07:18
    11. 2.10 FabricPath Data Plane 00:08:48
    12. 2.11 FabricPath Forwarding 00:05:55
    13. 2.12 FabricPath Host Connectivity and Routing 00:07:02
    14. 2.13 FabricPath Configuration and Troubleshooting 00:10:29
    15. 2.14 Dynamic Fabric Automation (DFA) Introduction 00:08:56
  4. Lesson 3: Layer 3 Support and Configurations
    1. Learning Objectives 00:00:36
    2. 3.1 EIGRP Configuration 00:05:45
    3. 3.2 EIGRP Verification and Troubleshooting 00:03:54
    4. 3.3 OSPF Configuration 00:07:49
    5. 3.4 OSPF Verification and Troubleshooting 00:04:59
    6. 3.5 IS-IS Configuration 00:03:34
    7. 3.6 IS-IS Verification and Troubleshooting 00:02:58
    8. 3.7 Basic BGP Configuration 00:12:11
    9. 3.8 BGP Verification 00:04:59
    10. 3.9 First Hop Redundancy Protocols (FHRPs) 00:14:53
    11. 3.10 Redistribution and Policy-Based Routing 00:06:49
  5. Lesson 4: NX-OS Multicast
    1. Learning Objectives 00:00:30
    2. 4.1 Multicast Basics 00:07:59
    3. 4.2 Internet Group Management Protocol (IGMP) and Protocol Independent Multicast (PIM) 00:07:37
    4. 4.3 Basic Multicast Configuration 00:11:54
    5. 4.4 Rendezvous Point (RP) Redundancy 00:09:47
    6. 4.5 Advanced Multicast Configuration 00:06:47
    7. 4.6 Control Plane Policing (CoPP) and Multicast 00:07:10
  6. Lesson 5: NX-OS Security
    1. Learning Objectives 00:00:31
    2. 5.1 NX-OS Security Basics 00:06:35
    3. 5.2 Access Control List (ACL) Basics 00:07:16
    4. 5.3 Advanced ACLs 00:11:03
    5. 5.4 NX-OS Data Center Encryption 802.1ae MacSec 00:06:47
    6. 5.5 Storm Control 00:05:29
    7. 5.6 Control Plane Policing (CoPP) 00:07:53
  7. Lesson 6: High Availability
    1. Learning Objectives 00:00:39
    2. 6.1 Nexus Hardware Basics 00:09:52
    3. 6.2 Generic Online Diagnostics (GOLD) 00:06:23
    4. 6.3 NX-OS High Availability Architecture and Features 00:08:42
    5. 6.4 NX-OS Software Upgrades – Cold Upgrade 00:03:46
    6. 6.5 NX-OS Software Upgrades – ISSU 00:05:44
  8. Lesson 7: Embedded Services
    1. Learning Objectives 00:00:25
    2. 7.1 SPAN in NX-OS 00:12:07
    3. 7.2 ERSPAN in NX-OS 00:07:58
    4. 7.3 Embedded Analyzer 00:09:22
    5. 7.4 Smart Call Home 00:06:40
    6. 7.5 Checkpoint Configuration and Rollback 00:10:04
    7. 7.6 NetFlow 00:07:51
    8. 7.7 Network Time Protocol 00:04:02
  9. Lesson 8: Unified Fabric
    1. Learning Objectives 00:00:27
    2. 8.1 Unified Fabric Basics 00:09:18
    3. 8.2 FCoE Basics 00:08:03
    4. 8.3 N Port Virtualization 00:09:41
    5. 8.4 Unified Fabric Configuration - Single Hop 00:05:21
    6. 8.5 Unified Fabric Configuration - Multihop 00:11:16
  10. Lesson 9: Nexus 1000v
    1. Learning Objectives 00:00:38
    2. 9.1 Nexus 1000v Basics 00:10:05
    3. 9.2 Nexus 1000v Multi-Hypervisor Integration 00:03:08
    4. 9.3 Nexus 1000v Stretched Deployment Guidelines 00:06:42
    5. 9.4 Nexus 1000v and VXLAN 00:10:26
    6. 9.5 Nexus 1000v and CTS 00:12:14
    7. 9.6 Nexus 1000v VSM and VEM Security 00:03:16
    8. 9.7 Nexus 1000v Storm Control 00:06:09
  11. Lesson 10: Quality of Service (QoS)
    1. Learning Objectives 00:00:27
    2. 10.1 Quality of Service Fundamentals 00:06:50
    3. 10.2 QoS in NX-OS 00:08:33
    4. 10.3 QoS on Nexus 7000 00:09:44
    5. 10.4 QoS on Nexus 5000 00:06:50
    6. 10.5 QoS on Nexus 1000v 00:03:17
  12. Lesson 11 – Overlay Transport Virtualization (OTV)
    1. Learning Objectives 00:00:48
    2. 11.1 OTV Basics 00:11:48
    3. 11.2 OTV Network Requirements and Options 00:12:57
    4. 11.3 OTV Multi-homing and Failure Isolation 00:07:12
    5. 11.4 First Hop Redundancy Protocol (FHRP) Localization and OTV 00:11:21
    6. 11.5 OTV Traffic Depolarization 00:02:19
    7. 11.6 OTV VLAN Translation 00:02:48
    8. 11.7 OTV Broadcast Control 00:05:07
    9. 11.8 OTV Integration with Fabrics 00:02:39
    10. 11.9 OTV and LISP Integration Whiteboard Session 00:08:03
  13. Lesson 12: Layer 3 Virtualization and MPLS
    1. Learning Objectives 00:00:38
    2. 12.1 Virtual Routing and Forwarding 00:07:07
    3. 12.2 Route Import/Export 00:06:10
    4. 12.3 MPLS Basics 00:07:45
    5. 12.4 Detailed MPLS Topics 00:07:41
    6. 12.5 MPLS Layer 2 VPNs 00:03:40
    7. 12.6 MPLS Layer 2 VPN Configuration 00:06:29
  14. Lesson 13: Locator ID Separator Protocol (LISP)
    1. Learning Objectives 00:00:36
    2. 13.1 LISP Basics 00:05:48
    3. 13.2 LISP Roles and Operations 00:04:42
    4. 13.3 IP Mobility/Host Mobility with Extended Subnets 00:08:39
    5. 13.4 IP Mobility Without Extended Subnets 00:06:20
    6. 13.5 LISP Multihop and Host Mobility 00:07:41
    7. 13.6 LISP Multihop Mobility 00:05:16
    8. 13.7 LISP Best Practices 00:06:40
  15. Summary
    1. NX-OS Configuration Fundamentals LiveLessons: Summary 00:01:55