You are previewing Network Warrior, 2nd Edition.

Network Warrior, 2nd Edition

Cover of Network Warrior, 2nd Edition by Gary A. Donahue Published by O'Reilly Media, Inc.
  1. Network Warrior
    1. Preface
      1. Who Should Read This Book
      2. Conventions Used in This Book
      3. Using Code Examples
      4. We’d Like to Hear from You
      5. Safari® Books Online
      6. Acknowledgments
    2. 1. What Is a Network?
    3. 2. Hubs and Switches
      1. Hubs
      2. Switches
    4. 3. Autonegotiation
      1. What Is Autonegotiation?
      2. How Autonegotiation Works
      3. When Autonegotiation Fails
      4. Autonegotiation Best Practices
      5. Configuring Autonegotiation
    5. 4. VLANs
      1. Connecting VLANs
      2. Configuring VLANs
    6. 5. Trunking
      1. How Trunks Work
      2. Configuring Trunks
    7. 6. VLAN Trunking Protocol
      1. VTP Pruning
      2. Dangers of VTP
      3. Configuring VTP
    8. 7. Link Aggregation
      1. EtherChannel
      2. Cross-Stack EtherChannel
      3. Multichassis EtherChannel (MEC)
      4. Virtual Port Channel
    9. 8. Spanning Tree
      1. Broadcast Storms
      2. MAC Address Table Instability
      3. Preventing Loops with Spanning Tree
      4. Managing Spanning Tree
      5. Additional Spanning Tree Features
      6. Common Spanning Tree Problems
      7. Designing to Prevent Spanning Tree Problems
    10. 9. Routing and Routers
      1. Routing Tables
      2. Route Types
      3. The IP Routing Table
      4. Virtual Routing and Forwarding
    11. 10. Routing Protocols
      1. Communication Between Routers
      2. Metrics and Protocol Types
      3. Administrative Distance
      4. Specific Routing Protocols
    12. 11. Redistribution
      1. Redistributing into RIP
      2. Redistributing into EIGRP
      3. Redistributing into OSPF
      4. Mutual Redistribution
      5. Redistribution Loops
      6. Limiting Redistribution
    13. 12. Tunnels
      1. GRE Tunnels
      2. GRE Tunnels and Routing Protocols
      3. GRE and Access Lists
    14. 13. First Hop Redundancy
      1. HSRP
      2. HSRP Interface Tracking
      3. When HSRP Isn’t Enough
      4. Nexus and HSRP
      5. GLBP
    15. 14. Route Maps
      1. Building a Route Map
      2. Policy Routing Example
    16. 15. Switching Algorithms in Cisco Routers
      1. Process Switching
      2. Interrupt Context Switching
      3. Configuring and Managing Switching Paths
    17. 16. Multilayer Switches
      1. Configuring SVIs
      2. Multilayer Switch Models
    18. 17. Cisco 6500 Multilayer Switches
      1. Architecture
      2. CatOS Versus IOS
      3. Installing VSS
    19. 18. Cisco Nexus
      1. Nexus Hardware
      2. NX-OS
      3. Nexus Iconography
      4. Nexus Design Features
    20. 19. Catalyst 3750 Features
      1. Stacking
      2. Interface Ranges
      3. Macros
      4. Flex Links
      5. Storm Control
      6. Port Security
      7. SPAN
      8. Voice VLAN
      9. QoS
    21. 20. Telecom Nomenclature
      1. Telecom Glossary
    22. 21. T1
      1. Understanding T1 Duplex
      2. Types of T1
      3. Encoding
      4. Framing
      5. Performance Monitoring
      6. Alarms
      7. Troubleshooting T1s
      8. Configuring T1s
    23. 22. DS3
      1. Framing
      2. Line Coding
      3. Configuring DS3s
    24. 23. Frame Relay
      1. Ordering Frame Relay Service
      2. Frame Relay Network Design
      3. Oversubscription
      4. Local Management Interface
      5. Configuring Frame Relay
      6. Troubleshooting Frame Relay
    25. 24. MPLS
    26. 25. Access Lists
      1. Designing Access Lists
      2. ACLs in Multilayer Switches
      3. Reflexive Access Lists
    27. 26. Authentication in Cisco Devices
      1. Basic (Non-AAA) Authentication
      2. AAA Authentication
    28. 27. Basic Firewall Theory
      1. Best Practices
      2. The DMZ
      3. Alternate Designs
    29. 28. ASA Firewall Configuration
      1. Contexts
      2. Interfaces and Security Levels
      3. Names
      4. Object Groups
      5. Inspects
      6. Managing Contexts
      7. Failover
      8. NAT
      9. Miscellaneous
      10. Troubleshooting
    30. 29. Wireless
      1. Wireless Standards
      2. Security
      3. Configuring a WAP
      4. Troubleshooting
    31. 30. VoIP
      1. How VoIP Works
      2. Small-Office VoIP Example
      3. Troubleshooting
    32. 31. Introduction to QoS
      1. Types of QoS
      2. QoS Mechanics
      3. Common QoS Misconceptions
    33. 32. Designing QoS
      1. LLQ Scenario
      2. Configuring the Routers
      3. Traffic-Shaping Scenarios
    34. 33. The Congested Network
      1. Determining Whether the Network Is Congested
      2. Resolving the Problem
    35. 34. The Converged Network
      1. Configuration
      2. Monitoring QoS
      3. Troubleshooting a Converged Network
    36. 35. Designing Networks
      1. Documentation
      2. Naming Conventions for Devices
      3. Network Designs
    37. 36. IP Design
      1. Public Versus Private IP Space
      2. VLSM
      3. CIDR
      4. Allocating IP Network Space
      5. Allocating IP Subnets
      6. IP Subnetting Made Easy
    38. 37. IPv6
      1. Addressing
      2. Simple Router Configuration
    39. 38. Network Time Protocol
      1. What Is Accurate Time?
      2. NTP Design
      3. Configuring NTP
    40. 39. Failures
      1. Human Error
      2. Multiple Component Failure
      3. Disaster Chains
      4. No Failover Testing
      5. Troubleshooting
    41. 40. GAD’s Maxims
      1. Maxim #1
      2. Maxim #2
      3. Maxim #3
    42. 41. Avoiding Frustration
      1. Why Everything Is Messed Up
      2. How to Sell Your Ideas to Management
      3. When to Upgrade and Why
      4. Why Change Control Is Your Friend
      5. How Not to Be a Computer Jerk
    43. Index
    44. About the Author
    45. Colophon
O'Reilly logo

Additional Spanning Tree Features

Spanning tree was originally designed for bridges with few ports. With the advent of Ethernet switches, some enhancements were made to spanning tree. These commonly seen enhancements helped make spanning tree more palatable by decreasing the time a host needs to wait for a port, and decreasing the convergence time in a Layer-2 network.

PortFast

PortFast is a feature on Cisco switches that allows a port to bypass all of the other spanning tree states (see Figure 8-5, shown earlier) and proceed directly to the forwarding state. PortFast should be enabled only on ports that will not have switches connected. Spanning tree takes about 30 seconds to put a normal port into the forwarding state, which can cause systems using DHCP to time out and not get an IP address (on a Windows machine, a default IP address may be used). Enabling the PortFast feature on a port alleviates this problem, but you should be very careful when using this feature. If a switch were to be connected to a port configured with PortFast active, a loop could occur that would not be detected.

To enable PortFast on an IOS switch, use the spanning-tree portfast interface command. The switch will deliver a nice warning about the dangers of PortFast when you enable the feature:

Cat-3550(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, ...

The best content for your career. Discover unlimited learning on demand for around $1/day.