Verifying the VPLS Operation
The output of Example 11-2 is taken on the router VPLS-PE-1 depicted in Figure 11-6. You use the show vfi command to verify the existence and state of the VFI cust-one.
Example 11-2. show vfi
VPLS-PE-1#show vfi cust-one
VFI name: cust-one, state: up
Local attachment circuits:
Neighbors connected via pseudowires:
The show mpls ldp neighbor command verifies the existence of the targeted LDP sessions between all PE routers for the VFI cust-one. In Example 11-3, VPLS-PE-1 has two targeted LDP sessions for the two remote PEs and one direct LDP neighbor: a P router.
Example 11-3. show mpls ldp neighbor
VPLS-PE-1#show mpls ldp neighbor Peer LDP Ident: 10.100.100.4:0; Local LDP Ident ...