For the motor, the protocol will be as follows:
s<space><pwm_value_of_motor_1><space><pwm_value_of_motor_2>
For resetting the device, the protocol will be as follows:
r<space>
We can check the serial values from the LaunchPad using a command-line tool called miniterm.py. This tool can view the serial data coming from a device. This script is already installed with the python-serial package, which is installed along with the rosserial-python Debian package. The following command will display the serial values from the robot controller:
$ miniterm.py /dev/ttyACM0 115200
We will get values such as these shown in the following screenshot:
Figure 4: Checking serial data using miniterm.py
