Once you have confirmed that you have physical connectivity, that the ports are enabled, and the port configuration is correct, you should confirm the following:
- Trunk ports are configured correctly and there is at least one connection between the trunk ports and the router. If you have a Cisco switch and are using DTP, you may want to switch to static port configuration until you confirm that the trunk ports are working correctly.
- Access ports are configured correctly and the nodes are connected to ports that are assigned to the VLANs to which they should belong.
- VLANs have been set up correctly and have been assigned VLAN IDs that correspond to the VLAN IDs assigned in pfSense.
- The correct encapsulation format ...
