Written by Sean Michael Ragan ■ Illustrations by Julie West
You will need
Development board with 3+ mounting holes such as Arduino Uno, BeagleBone Black, etc.
14mm × 8 mm recessed rubber bumper (4) Uxcell #A11120700UX0247
M3 × 10mm F/F threaded hex standoff (4) McMaster-Carr 92080A110
M3 lock washer (8) McMaster-Carr 91111A118
M3 × 8mm JIS pan head Phillips machine screw (8) McMaster-Carr 94102A103
M3 flat washer (8) McMaster-Carr 93475A210
Phillips head screwdriver
When working with Arduino and other boards, most people just set the bare PCB down on the bench, hook up cables and components, and go. ...