Name

route

Synopsis

                  route [options] [command]

TCP/IP command. Add or remove entries in the routing tables maintained by routed. route accepts two commands: add, to add a route, and del, to delete a route. The two commands have the following syntax:

                  add [-net | -host] 
                  address [modifiers]
del [-net | -host] 
                  address [modifiers]

address is treated as a plain route unless -net is specified or address is found in /etc/networks. -host can be used to specify that address is a plain route whether or not it is found in /etc/networks. Using route modifiers, you can specify the gateway through which to route packets headed for that address, its netmask, TCP mss, or the device with which to associate the route; you can also mask certain routes. Only a privileged user may modify the routing tables.

If no command is specified, route prints the routing tables.

Options

-n, --numeric

Show numerical addresses; do not look up hostnames. (Useful if DNS is not functioning properly.)

-e, --extend

Use netstat -r format to print routing table. Use twice to print extended information. Same as netstat -ree.

-h, --help

Print help message, then exit.

-v, --verbose

Verbose mode.

-A family, -- family

Specify an address family to use with an add or del command. family may be inet, inet6, ax25, netrom, ipx, ddp, or x25.

-C, --cache

Perform command on the routing cache instead of the forwarding information base (FIB) routing table.

-F, --fib

Perform command on the forwarding information base (FIB) routing table. This ...

Get Linux in a Nutshell, Fourth Edition now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.