Large-Scale IP Network Solutions (CCIE Professional Development)

RIPV1 Configuration Examples

Enabling RIPV1 on a network is relatively simple. You only need to list the connected networks under the router RIPV1 statement for which you want to enable RIPV1 (see Figure 6-13).

Figure 6-13. Enabling RIPV1 on Different Networks

The configuration for R1 in Figure 6-13 is as follows:

router ripnetwork 140.10.0.0

Notice that network 150.10.0.0 is not listed; R1 will not send out RIPV1 broadcasts via Ethernet 0, and it will not include this network in its updates. Notice also that R1 does not need to list network 160.10.0.0 under its router RIPV1 statement; you only need to list the directly connected networks ...