Nine physical styles are provided by the current HTML and XHTML standards: bold, italic, monospaced, underlined, strikethrough, larger, smaller, superscripted, and subscripted text. Much to our relief, Netscape 6 has stopped supporting a tenth physical style, “blinking” text. All physical style tags require ending tags.
As we discuss physical tags in detail, keep in mind that they convey an acute styling for the immediate text. For more comprehensive, document-wide control of text display, use style sheets (see Chapter 8).
<b> tag is the physical equivalent of the
<strong> content-based style tag, but
without the latter’s extended meaning. The
<b> tag explicitly boldfaces a character or
segment of text that is enclosed between it and its corresponding end
</b>). If a boldface font is not
available, the browser may use some other representation, such as
reverse video or underlining.
<big> tag makes it easy to increase the size
of text. It couldn’t be simpler: the browser renders
the text between the
<big> tag and its
</big> ending tag one font size
larger than the surrounding text. If that text is already at the
<big> has no effect. [<font>]
Even better, you can nest
<big> tags to
enlarge the text. Each
<big> tag makes the
text one size larger, up to a limit of size seven, as defined by the
Be careful with your use of the
though. Because browsers are quite forgiving and try hard to
understand a tag, those that don’t support
<big> often interpret it to mean bold.
Text contained between the
<blink> tag and its end tag
</blink> does just that: blinks on and off.
Netscape for Macintosh, for example, simply and reiteratively
reverses the background and foreground colors for the
<blink>-enclosed text. Neither the HTML nor
the XHTML standard includes
<blink>; it was
supported as an extension only by Netscape Navigator versions before
We cannot effectively reproduce the animated effect in these static pages, but it is easy to imagine and best left to the imagination, too. Blinking text has two primary effects: it gets your reader’s attention and then promptly annoys them to no end. Forget about blinking text.
<i> tag is like the
<em> content-based style tag. It and its
necessary end tag (
</i>) tell the browser to
render the enclosed text in an italic or oblique typeface. If the
typeface is not available to the browser, highlighting, reverse
video, or underlining might be used.
is an abbreviated form of the
supported by both Internet Explorer and Netscape. It is now a
deprecated tag in HTML 4 and XHTML, meaning don’t
use it; it will eventually go away.
<small> tag works just like its
<big> counterpart (see Section 4.5.2), except it decreases the size of text instead
of increasing it. If the enclosed text is already at the smallest
size supported by the font model,
has no effect.
<big>, you can nest
<small> tags to sequentially shrink text.
<small> tag makes the text one size
smaller than the containing
<small> tag, to
a limit of size 1.
The popular browsers put a line through (“strike
through”) text that appears inside the
tag and its
</strike> end tag. Presumably, it is an
editing markup that tells the reader to ignore the text passage,
reminiscent of the days before typewriter correction tape.
You’ll rarely, if ever, see the tag in use today: it
is deprecated in HTML 4 and XHTML, just one step away from complete
elimination from the standard.
The text contained
<sub> tag and its
</sub> end tag gets displayed half a
character’s height lower, but in the same font and
size as the current text flow. Both
<sup> counterpart are useful for
math equations and in scientific notation, as well as with chemical
tag and its
</sup> end tag superscripts the enclosed
text; it gets displayed half a character’s height
higher, but in the same font and size as the current text flow. This
tag is useful for adding footnotes to your documents, along with
exponential values in equations. In combination with the
<a> tag, you can create nice, hyperlinked
The larval quat weevil<a href="footnotes.html#note74"><sup><small>74</small></sup></a> is a
This example assumes that footnotes.html contains all your footnotes, appropriately delimited as named document fragments.
<tt> tag and its necessary
</tt> end tag direct the browser to display
the enclosed text in a monospaced typeface. For those browsers that
already use a monospaced typeface, this tag may make no discernible
change in the presentation of the text.
tag tells the browser to
underline the text contained between the
and the corresponding
</u> tag. The
underlining technique is simplistic, drawing the line under spaces
and punctuation as well as the text. This tag is deprecated in HTML 4
and XHTML, but the popular browsers support it.
The same display effects for the <
u> tag are
better achieved by using style sheets, covered in Chapter 8.
dir attribute lets you advise the browser
which direction the text within the physical tag should be displayed
lets you specify the language used
within the tag. [Section 126.96.36.199] [Section 188.8.131.52]
physical tag has a defined style, you can override that style by
defining your own look for each tag. This new look can be applied to
the physical tags using either the
class attributes. [Section 8.1.1]
You also may assign a unique id to the physical style tag, as well as a less rigorous title, using the respective attribute and accompanying quote-enclosed string value. [Section 184.108.40.206] [Section 220.127.116.11]
As with content-based style tags, user-initiated mouse and keyboard events can happen in and around a physical style tag’s contents. Many of these events are recognized by the browser if it conforms to current standards, and, with the respective “on” attribute and value, you may react to the event by displaying a user dialog box or activating some multimedia event. [Section 12.3.3]
The various graphical browsers render text inside the physical style tags in a similar fashion. Table 4-2 summarizes these browsers’ display styles for the native tags. Style-sheet definitions may override these native display styles.
Table 4-2. Physical style tags
Increased font size
Alternating fore- and background colors
Decreased font size
The following HTML source example illustrates some of the various physical tags as rendered by Netscape (see Figure 4-12):
Explicitly <b>boldfaced</b>, <i>italicized</i>, or <tt>teletype-style</tt> text should be used <big><big>sparingly</big></big>. Otherwise, drink <strike>lots</strike> 1x10<sup>6</sup> drops of H<sub><small><small>2</small></small></sub>O.
Any physical style tag may contain any item allowed in text, including conventional text, anchors, images, and line breaks. You can also combine physical style tags with other content-based tags.
Any physical style tag may be used anywhere an item allowed in text
can be used. In general, this means anywhere within a document except
<xmp> tags. You can use a physical style tag
in a heading, but the browser will probably override and ignore its
effect in lieu of the heading tag.
You will probably have better luck combining physical tags than you might have combining content-based tags to achieve multiple effects. For instance, Netscape renders the following in bold and italic typeface:
<b><i>Thar she blows!</i></b>
In practice, other browsers may elect to ignore such nesting. The HTML 4 standard does require the browser to “do its best” to support every possible combination of styles, but it does not define how the browser should handle such combinations. Although most browsers make a good attempt at doing so, do not assume that all combinations will be available to you.