Chapter 10: Installing and Configuring Printers
1. Power on the printer, and open the top cover to expose the area containing the print cartridges.
2. Initiate a self-cleaning cycle.
3. When the printhead moves from its resting place, pull the AC power plug.
4. Locate the sponge pads on which to apply the cleaning solution.
5. Using the supplied syringe, apply the cleaning solution to the sponge pads until they are saturated.
6. Plug the printer back into the wall outlet, and turn it on. The printheads will park themselves.
7. Turn the printer back off. Let the solution sit for at least three hours.
8. Power the printer back on, and run three printer cleaning cycles. Print a nozzle check pattern (or a test page) after each cleaning cycle ...
Get CompTIA A+ Complete Deluxe Study Guide Recommended Courseware: Exams 220-801 and 220-802, 2nd Edition now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
