O'Reilly logo

Cisco OSPF Command and Configuration Handbook by William R. Parkhurst - Ph.D., CCIE #2969

Stay ahead with the world's most comprehensive technology and business learning platform.

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, tutorials, and more.

Start Free Trial

No credit card required

Chapter 11. OSPF neighbor Commands

neighbor ip-address

Syntax Description:

  • ip-address—IP address of the OSPF neighbor. If a secondary address is used on the interface, then the primary address must be used with this command.

Purpose: To configure OSPF neighbors over a nonbroadcast multiaccess (NBMA) network such as Frame Relay or X.25.

Initial Cisco IOS Software Release: 10.0 (12.0 for multipoint networks)

Configuration Example 1: Using the neighbor Command to Enable OSPF on an NBMA

OSPF treats an NBMA network like any other broadcast network such as Ethernet. Because of this, OSPF thinks the network has broadcast capabilities even though it does not. This lack of a broadcast capability necessitates the use of the neighbor command to establish an ...

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, interactive tutorials, and more.

Start Free Trial

No credit card required