O'Reilly logo

Cisco LAN Switching Fundamentals by Basir Sakandar - CCIE No. 6040, David Barnes - CCIE No. 6563

Stay ahead with the world's most comprehensive technology and business learning platform.

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, tutorials, and more.

Start Free Trial

No credit card required

Configuring the Access Layer

Switchports on the Catalyst 5500 SW3 and interfaces on the Catalyst 4506 SW4 will be configured in VLANs to support access layer devices. Figure 7-10 shows the IP network numbers assigned to these VLANs.

Figure 7-10. Addition of Access Layer VLANs

Configuring the access layer begins with configuring ports on SW3 to be in VLAN 130. VLAN 130 is one of the access layer VLANs in the VLAN addressing scheme outlined in Table 7-1 earlier in this chapter. Remember VLAN 130 was created on SW3 earlier in VTP configuration (refer to Example 7-3). In Example 7-37, module 4 on SW3 is a 24-port 10/100 Mb FastEthernet module, and ...

With Safari, you learn the way you learn best. Get unlimited access to videos, live online training, learning paths, books, interactive tutorials, and more.

Start Free Trial

No credit card required