Name
pvc — interface
Synopsis
pvc [name
]vpi/vci
[encap
] no pvc [name
]vpi/vci
[encap
]
Configures
ATM PVC
Default
None
Description
This command configures a Permanent Virtual Circuit (PVC) on an ATM
interface. It isn’t supported on all ATM hardware; more
sophisticated ATM hardware tends to use the atm
pvc
command.
-
name
Optional. A name to be assigned to this PVC.
-
vpi/vci
The Virtual Path Identifier and the Virtual Channel Identifier, separated by a slash. If you omit the slash and the
vci
, it defaults to 0. Ifvci
is 0,vpi
cannot be 0, and vice versa.- encap
Optional. The type of encapsulation to use on the channel. Possible values are
ilmi
,qsaal
, andsmds
.ilmi
is used to set up a connection for the Integrated Local Management Interface, and is normally used with the VPI/VCI pair 0/16.qsaal
sets up a PVC used for setting up and tearing down SVCs (switched virtual circuits), and is normally used with the VPI/VCI pair 0/5.smds
is used only for SMDS networks.
Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.