Name
ip pim query-interval — interface
Synopsis
ip pim query-interval seconds
no ip pim query-interval Configures
The frequency of PIM query messages
Default
30 seconds
Description
This command sets the query interval to
seconds. The query message is used to
determine which router on the subnet will be the designated router.
The designated router sends IGMP messages to the rest of the routers
on the LAN; it also sends messages to the rendezvous point when
operating in sparse-mode. The query interval defaults to 30 seconds
and can be set to a value between 1 and 65535 seconds.
Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
