Name

ip mroute — global

Synopsis

ip mroute source 
               mask [protocol as-number] {rpf-address | interface} [distance]
no ip mroute source 
               mask [protocol as-number] {rpf-address | interface} [distance]

Configures

A multicast static route

Default

None

Description

This command adds a static multicast route.

source

The source IP address.

mask

Network mask for the source address.

protocol as-number

Optional. The unicast routing protocol you are using, followed by the protocol’s process number or autonomous system number, if applicable.

rpf-address

The address of the incoming interface for the multicast route. This address can be a host address or a network address.

interface

The incoming interface for the route (e.g., serial0).

distance

Optional. This value is used to decide if a unicast, DVMRP, or static route should be used for RPF lookup.

Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial