Name
dialer-list — global
Synopsis
dialer-listgroup
listaccess-list
dialer-listgroup
protocolprotocol
{permit | deny | list}access-list
no dialer-listgroup
Configures
Assigns an access list to a dialer group
Default
None
Description
The first version of this command specifies a group number and applies the given access list to that group. The access list defines “interesting” traffic for the dialer group. If traffic matches the access list, it is deemed interesting, and the DDR interface establishes a connection (if one hasn’t been already established).
-
group
The dialer group number.
-
list
access-list
The access list that defines interesting traffic for this group.
The second version of this command allows you to specify the traffic that brings up the connection without using an external access list. Its parameters are:
-
group
The dialer group number.
-
protocol
protocol
The protocol to allow (or reject):
ip
,ipx
, etc.-
permit
Permits traffic using this protocol.
-
deny
Denies the entire protocol.
-
list
access-list
Applies an access list to the protocol. Used to single out ports within the protocol.
Examples
The following commands define a dialer group, assign an interface to that dialer group, and specify that the interface should be brought up if traffic matching access list 110 appears on the interface.
interface async 5 dialer-group 10 ! ! Define the access-list for group 10 dialer-list 10 list 110 ! ! Define the list ( all IP traffic to 10.10.1.0 network) access-list 110 permit ip any 10.10.1.0 ...
Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.