The Router’s Configuration
Every router has two different configurations to consider:
- Running configuration
The router’s active configuration, which is stored in the router’s RAM. Every configuration command you give is stored in the running configuration. If you reboot your router, this configuration will be lost. If you make changes that you want to save, you must copy the running configuration to a safe location, such as a network server, or save it as the router’s startup configuration.
- Startup configuration
The configuration that is loaded when the router boots. This configuration is stored in the router’s nonvolatile memory (NVRAM). You cannot edit a startup configuration directly. All commands you enter are stored in the running configuration, which can be copied into the startup configuration.
In other words, when you boot a router, the startup configuration becomes the initial running configuration. As you modify the configuration, the two diverge: the startup configuration remains the same, while the running configuration reflects the changes you have made. If you want to make your changes permanent, you must copy the running configuration to the startup configuration.
The following command copies the router’s current running configuration into the startup configuration:
Router#copy running-config startup-config
Building configuration...Similarly, to save the running configuration on a network server using TFTP, you would give the command:
Router#copy running-config tftp ...Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
