Name
isis hello-multiplier — interface
Synopsis
isis hello-multiplier value
[{level-1 |level-2}]
no isis hello-multiplier
Configures
The holdtime value multiplier
Default
3
Description
For IS-IS
, the holdtime is calculated by taking the hello interval and multiplying it by the hello multiplier. This command sets the hello multiplier to value
. By changing the hello multiplier, you effectively change the holdtime. The optional level-1
and level-2
keywords allow you to apply this command to an individual level; otherwise the interval is applied to both levels.
Example
The following commands configure IS-IS routing for the interface ethernet 1
. The hello interval is set to 5 seconds (for level 1) and the multiplier is set to 5, yielding a holdtime of 25 seconds.
interface ethernet 1 ip router isis isis hello-interval 5 level-1 isis hello-multiplier 5 level-1
Get Cisco IOS in a Nutshell, 2nd Edition now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.