Cisco IOS in a Nutshell, 2nd Edition

Name

exit — command

Synopsis

exit

Description

This command closes your current connection if you are in user EXEC mode or privileged EXEC mode. If you are in a subconfiguration mode such as the interface or routing configuration mode, this command takes you to the next higher level (e.g., back to EXEC mode from interface configuration mode).

Example

Routerexit
Connection Closed

Routerenable
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface serial0
Router(config-if)#exit
Router(config)#