Name

channel-group (controller) — controller

Synopsis

channel-group channel-number timeslots range [speed kbps]
no channel-group channel-number timeslots range [speed kbps]

Configures

T1 or E1 timeslots

Default

None

Description

This command defines the channel timeslots for a fractional T1 or E1 line. Your service provider determines the timeslots for your lines.

channel-number

A number identifying the communication channel you are defining. For T1 lines, the channel number can be from 0 to 23; for E1 lines, 0 to 30.

timeslots range

A list of timeslots that make up this communication channel. The list can be a series of comma-separated timeslot numbers, or a pair of timeslots separated by a dash to indicate a range. Timeslot numbers range from 1 to 24 on a T1 line; 1 to 31 for E1. A timeslot cannot belong to more than one channel group.

speed kbps

The speed of a single timeslot in Kbps. Allowable values are 48, 56, and 64. 56 is the default for T1; 64 is the default for E1.

Example

When defining the timeslots range, the value can be a single number or a group of ranges separated by commas and hyphens. For example, the following ranges are all valid:

channel-group 3 timeslots 4
channel-group 5 timeslots 4,6-15,24
channel-group 8 timeslots 4-10

Get Cisco IOS in a Nutshell, 2nd Edition now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial