MPC Configuration Examples
This section contains an example of the commands needed to configure an MPC. The lines beginning with exclamation points (!) are comments explaining the command shown on the subsequent line. Figure 24-1 shows an example of how you can configure your system to use MPOA.
Figure 24-1. An Example of an MPOA Configuration
The following example configures the MPC and attaches the MPC to a hardware interface:
! Define the MPS "MYMPC"mpoa client config name MYMPC! Leave everything as defaultexit!Specify the ATM interface to which the MPC is attachedinterface ATM 1/0!Attach MPC MYMPC to the HW interfacempoa client name MYMPC ...
Get Cisco IOS 12.0 Switching Services now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
