Configuring an MPC/MPS
To configure an MPC/MPS, perform the following tasks:
Define a name for the MPC/MPS
Attach the MPC/MPS to a major interface. This task serves two purposes:
Assigns an ATM address to the MPC/MPS.
Identifies an endpoint for initiating and terminating MPOA virtual circuits.
Bind the MPC/MPS to multiple LECs.
Multiple MPCs/MPSs can run on the same physical interface, each corresponding to a different control ATM address. Once an MPC/MPS is attached to a single interface for its control traffic, it cannot be attached to another interface unless you break the first attachment. The MPC/MPS is attached to a subinterface 0 of the interface.
In Figure 23-2, MPC/MPS 1 is attached to interface 1; MPC/MPS 1 can only use interface 1 to ...
Get Cisco IOS 12.0 Switching Services now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
