tag-switching atm control-vc
To configure the VPI and VCI to be used for the initial link to the Tag Switching peer device, use the tag-switching atm control-vc interface configuration command. The initial link is used to establish the TDP session and to carry non-IP traffic. To clear the interface configuration, use the no form of this command.
tag-switching atm control-vc vpi vci
no tag-switching atm control-vc vpi vci
Syntax | Description |
---|---|
vpi | Virtual path identifier. |
vci | Virtual channel identifier. |
Default
If the subinterface has not changed to a VP tunnel, the default is 0/32. If the subinterface corresponds to VP tunnel VPI X, the default is X/32.
Command Mode
Interface configuration
Usage Guidelines
This command first ...
Get Cisco IOS 12.0 Switching Services now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.