DLSw+ Configuration (0.75 Hours)
Configure DLSw+ on R1, R3, R5, and R8:
Rings 100, 500, and 800 should have connectivity to VLAN 2 and 3.
SNA hosts reside on Rings 100 and 500.
Hosts on Ring 500 are used only when Ring 100 is not reachable.
Ensure that all routers peer to R1 and only in a network failure do DLSw+ circuits terminate on R5.
DLSw+ peers should be active only when user-based traffic (SNA/NetBIOS) is sent or received.
If IP connectivity exists, ensure that DLSw+ remains established.
Use a different virtual ring group on each router.
Configure a filter that blocks NetBIOS packets with the destination name SimonisaCCIE from leaving R5 and R8. Permit all other NetBIOS traffic starting with the name Simonis?***.
Ensure that remote DLSW+ peers ...
Get CCNP® Practical Studies: Routing now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.