Frame Relay Setup (0.5 Hours)
Configure IP across your Frame Relay network as displayed in Figure D-2:
You have to use static maps for each protocol. No dynamic mapping is permitted.
No subinterfaces are allowed on any router.
Use a most efficient subnetwork for IP addresses on the Frame cloud.
You may assign a subnet from your Class B range.
Use LMI type to Cisco only, and do not rely on autosensing the LMI type on any routers. All router interface types are DTE. The Frame port type is DCE.
Do not use the keyword broadcast for the Frame Relay link between R6 and R7 when mapping IP.
Ensure that you can also ping the local interface from each router configured for Frame Relay.
Get CCNP® Practical Studies: Routing now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
