BGP Routing Configuration (0.75 Hours)
After finishing each of the following sections, make sure all configured interfaces/subnets are consistently visible on all pertinent routers, even in the event of network failure of any one router.
Basic IBGP Configuration (0.5 Hours)
Configure IBGP on all routers in your network:
Do not use any WAN IP interfaces for IBGP sessions, as your network is prone to failures across the Frame Relay cloud.
Configure R5 and R8 as route reflectors, and ensure that all traffic uses a preferred path through router R5.
Minimize IBGP configurations as much as possible.
Do not disable BGP synchronization.
Use AS 2002 on all IBGP routers.
As long as there is IP connectivity in your network, ensure BGP is active in all routers. ...
Get CCNP® Practical Studies: Routing now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
