CCNA Wireless 640-722 Official Cert Guide

Creating a Dynamic Interface

In Chapter 10, “Initial Controller Configuration,” you learned about the different types of controller interfaces. A dynamic interface is used to connect the controller to a VLAN on the wired network. When you create a WLAN, you will bind the dynamic interface (and VLAN) to a wireless network.

To create a new dynamic interface, navigate to Controller > Interfaces. You should see a list of all the controller interfaces that are currently configured. Click the New button to define a new interface. Enter a name for the interface and the VLAN number it will be bound to. In Figure 15-4, the interface named Engineering is mapped to wired VLAN 100. Click the Apply button.

Figure 15-4 Defining a Dynamic Interface Name and ...