CCIE Security Practice Labs

Section 2.0: Routing Configuration (20 points)

2.1. OSPF (4 points)

1. Configure OSPF as shown in Figure 7-3.

2. Do not change the default network type on the Frame Relay network.

3. Redistribute where necessary. Make sure all networks appear on all routers using the optimal path.

4. Configure clear-text authentication.

5. R8 must not learn any OSPF routes from neighbor R5. Do not configure a distribute list or passive interface on any routers to achieve this task.

2.2. EIGRP (3 points)

1. Configure EIGRP AS 10 on R3 and R7 as shown in Figure 7-3. Advertise the VLAN5 network in EIGRP.

2. Make sure all routers can ping the Test PC.

3. Redistribute EIGRP into OSPF on R3 and R7.

4. Configure strong authentication.

5. R4 and R5 should reach the VLAN5 network via R3 and not R5. Do not ...