CCIE Security Practice Labs

Section 1.0: Basic Configuration (15 points)

1.1. IP Addressing (2 points)

1. Redraw a detailed topology with all necessary information.

2. Configure IP addressing as shown in Figure 6-1.

3. Make sure you can ping all devices.

4. Configure the following loopbacks:

   Loopback-1 11.11.11.11/24 on R1

   Loopback-1 22.22.22.22/24 on R2

   Loopback-1 33.33.33.33/24 on R3

   Loopback-1 44.44.44.44/24 on R4

   Loopback-1 55.55.55.55/24 on R5

   Loopback-2 155.155.155.155/24 on R5

   Loopback-1 66.66.66.66/24 on R6

   Loopback-1 77.77.77.77/24 on R7

   Loopback-1 88.88.88.88/24 on R8

   Loopback-2 188.188.188.188/24 on R8

1.2. Frame Relay Configuration (3 points)

1. Configure R4 as a Frame Relay switch using the DLCI information provided for Frame Relay routing in Figure 6-2.

2. Configure Frame Relay between R3, ...