Section 4.0: PIX Configuration

4.1. Basic PIX Configuration

  1. Configure the PIX inside/outside IP address as shown in Figure 6-1.

  2. Configure RIP for the inside interface using MD5 authentication, as demonstrated in the configuration after item 6.

  3. Configure RIP to advertise the default route to inside (R1) but not the outside.

  4. Do not configure ACL on interface(s); use conduits instead, as demonstrated in the configuration after item 6.

  5. Configure PAT translation to 164.15.4.254 for all networks behind PIX to be able to ping any networks outside the PIX, as demonstrated in the configuration after item 6.

  6. Configure static NAT translation for R1 FastEthernet0/0 - 192.168.3.1 to 164.15.4.10 for BGP peering. Configure conduit(s) to permit BGP connection from ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial