Section 4.0: PIX Configuration (8 points)

4.1. Basic PIX Configuration (4 points)

  1. Configure host name PIX with an inside/outside IP address as shown in Figure 5-1.

  2. Configure RIP for inside and outside interfaces using MD5 authentication.

  3. Configure RIP to advertise a default route to inside (R1) but not outside.

  4. Configure global PAT translation for all networks behind PIX to be able to ping any networks outside the PIX.

  5. PIX receives a RIP route for Loopback-2 on R1. Configure translation for the 22.22.22.0/24 network to 122.122.122.0/24. Do not use the static command to achieve this task. Configure a static route on R3 for 122.122.122.0/24 and advertise to the rest of the network.

  6. Configure static NAT translation for R1 Loopback-1 11.11.11.11 to the ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial