CCIE Security Practice Labs

Section 2.0: Routing Configuration (25 points)

2.1. OSPF (7 points)

1. Configure OSPF as shown in Figure 5-3.

2. Configure simple authentication for all areas.

3. Area 1 should have full redundancy to the OSPF backbone if any router in Frame Relay goes down.

4. Do not configure any OSPF Virtual Link in Area 2 or Area 3.

5. All routers should see the Area 2 network.

6. R5 should do per-packet load balancing for VLAN-4 network in Area 0. Do not use any static routes to achieve this task.

7. Advertise Loopback-1 on R2, R3, R5, R6, R7, and R8 in OSPF.

8. Configure null routes for the following networks on R5 (major net should appear as one route on every device):

   151.151.151.0/24

   151.151.152.0/24

   151.151.153.0/24

2.2. EIGRP (3 points)

1. Configure EIGRP AS5 between the ATM network on ...