Section 1.0: Basic Configuration (13 points)

1.1. IP Addressing (2 points)

  1. Redraw a detailed topology with all necessary information.

  2. Configure IP addressing as shown in Figure 5-1.

  3. There should be no default gateway on any router except R1. R1 should only learn the default route via PIX and no other device. Do not advertise or originate the default gateway using any routing protocol.

  4. Make sure you can ping all devices toward the end of the lab.

  5. Configure the following loopbacks:

    Loopback-1 11.11.11.11 on R1

    Loopback-1 12.12.12.12 on R2

    Loopback-1 13.13.13.13 on R3

    Loopback-1 14.14.14.14 on R4

    Loopback-2 14.14.1.1 on R4

    Loopback-3 14.14.2.1 on R4

    Loopback-1 15.15.15.15 on R5

    Loopback-2 155.155.155.155 on R5

    Loopback-5 192.168.1.0 on R5

    Loopback-1 16.16.16.16 ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial