Section 4.0: PIX Configuration

4.1. Basic PIX Configuration

  1. Configure host name and IP addresses as defined.

  2. Configure RIP with MD5 on the outside interface as shown in Figure 4-3. See Example 4-22.

  3. Configure the default route for the inside network to Switch1 VLAN-10 IP address 172.16.1.10. See Example 4-24.

  4. Configure static NAT for CA server 172.16.3.254 to 140.52.0.254. See Example 4-23.

  5. Configure static NAT for Switch1 and Switch2 management interface 172.16.4.10 and 172.16.4.20, respectively. See Example 4-23.

  6. Configure static NAT for Loopback1 of R1 to 11.11.11.11. See Example 4-23.

  7. Configure a static NAT and ACL for a mail server with IP address 172.16.4.251 to 140.52.0.251. See Example 4-23.

  8. Make sure you can ping AAA server and both switch ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial