CCIE Security Practice Labs

Section 4.0: PIX Configuration (10 points)

4.1. Basic PIX Configuration (4 points)

1. Configure host name PIX.

2. Configure outside IP address 120.5.72.1/25.

3. Configure inside IP address 10.1.1.1/24.

4. Configure RIP on the inside and outside interfaces as shown in the routing protocol information in Figure 3-2.

5. Configure strong authentication for RIPv2 peers.

6. Make sure you can ping AAA server, loopback(s), and all networks in the topology.

4.2. Network Address Translation (NAT) (4 points)

1. You should receive RIP route(s) from R6. Configure network address translation for all internal networks to their corresponding octets with the first octet to be 110. For example, translate 10.1.1.1 to 110.1.1.1.

2. All Loopback1(s) on devices behind PIX should be visible on ...