Section 2.0: Routing Configuration (27 points)

  1. Configure routing protocols as per the following instructions using Figure 3-2.

2.1. OSPF (8 points)

  1. Configure the network between R1-R2-R3 and the ISDN network in OSPF Area0.

  2. Configure OSPF load balancing in Area0. R1 must round-robin between R2 and R3 to send/receive traffic.

  3. Put VLAN-13 interfaces on R2 and R3 in OSPF Area10.

  4. Configure R6-R7 in Area0. Note that there is a separate OSPF process running for networks behind PIX/VPN3000.

  5. Networks behind PIX/VPN3000 should not be visible on devices outside PIX/VPN3000. Do not use distribute-list or any filtering methods to achieve this task.

  6. Networks in front of PIX/VPN3000 should not be visible on devices behind PIX/VPN3000. You can use distribute-list ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial